AC6322是一个27...65 vac / 35...90 VDC switch mode power supply kit for AC9400 optical nodes.
AC6902是一款适配器,用于使用行业标准的无线BT连接将PC或平板电脑/移动设备连接到电话este产品.
ANT/卷曲保护器为拼接的光纤连接提供持久可靠的保护.
收缩套筒设计,最大限度地保护湿气,当安装在室外被动组件.
AD-041L是独特的测试探头,设计与5/8”端口匹配.
The AC6993 is a DOCSIS 3.1个频率范围兼容CATVisor/HMS应答器,包含一个射频调制解调器和一个电平测量单元.
HDX300是一个水平,19英寸机架安装,1U间隔/电缆馈线槽框架.
HDX201连接器工具用于在高密度或难以到达的位置轻松安装或拆卸F连接.
The HDX115 is a replacement fan kit for HDO units
HDX007盖板是一个简单的解决方案,可以覆盖HDX前端机架设置中的任何空模块插槽.
HDX电源备份电缆最多可并联5个安装框,实现分布式电源备份功能.
AC6430是AC9100 NEO/AC9400节点的RPD连接模块.
6427/-28是一款用于AC/ACE/E/CX3放大器和光节点的壁挂式支架.
AC6415是一套150mm的USB延长线,USB a (f) - USB mini B (m).
The PFS301 is a transformer with 230 V input and 48 V, 6.3 A (300va)输出.
The PFS151 is a transformer with 230 V input and 48 V, 3.1 A (150va)输出.
PFM600是一个输入230v,输出60v, 10a (600va)的变压器.
的ACE601, ACE602和ACE603电源可用于ACE系列光节点和放大器.
AC6321是一个27...65 VAC (sinus or square wave) / 35...AC6440 RPD更换套件中使用的90直流电源单元.
The AC6320 is a complete, 远程供电90vac电源套件,用于电话este光节点和放大器.
AC6319是一个带有230 VAC电源的盖子,用于AC8800/8710光学平台.
AC6317是一个27...65 vac / 35...90 VDC switch mode power supply kit for AC9000/9100.
AC6316是一款适用于AC9000光节点的27…65vac / 35…90vdc电源套件.
The AC6315 is a power supply with an input of 40...90 VAC for use in the lid mechanics of the AC8000/8800 nodes.
The AC6314 is a complete, 本地供电230vac电源套件,用于电话este光节点和放大器.
The AC6313 is a complete, 远程供电的65 VAC电源套件,用于电话este光学节点和放大器.
AC6312是一个带有两个65vac电源的盖子,用于电话este AC8x00光节点.
AC6311为电话este AC8x00光节点提供一个65vac电源
The AC6310 is a power supply with an input of 27...65v ac / 35...90 VDC for use in the lid mechanics of the AC8000/8800 nodes.
TXX2C1是一种前向路径均衡器,用于校正高频和低频端的滚降.
TXX258是一个前向路径均衡器,纠正由204/258 MHz双工滤波器引起的滚降.
TXX1G2是一个正向路径均衡器,支持的频率范围为85...1218兆赫 that corrects roll-off at high-frequency end
TXS0xx系列电缆模拟器支持的频率范围为85...1218兆赫 are designed to be used in 1.2 GHz的放大器,但它们也可以用于1 GHz和862 MHz的产品
The TNE0xx- series cable equalisers are designed to be used in 1.2 GHz amplifiers and nodes.
The CXM8/-14 tap modules with a supported frequency range of 5...1218兆赫 for CX3 amplifiers.
CXM4为分频模块,支持频率范围为5...1218兆赫 for CX3 amplifiers.
CXM1是CX3放大器的跳线模块,衰减为0 dB.
CXF204 UAx是包含固定返回路径衰减器的插件滤波器, covering the frequency ranges 5...204 MHz / 258...1218兆赫.
CXF204为外接式双工滤波器,频率范围为5...204 MHz / 258...1218兆赫.
CXF0204 10/ 19是双工滤波器,结合了一个入口阻断器.
CXF085是一个覆盖频率范围5的插入式双工滤波器...85mhz / 102...1218兆赫.
CXF085是一个覆盖频率范围5的插入式双工滤波器...85 MHz / 105...1218兆赫.
CXF085 DA2/4/6是具有下行衰减的插入式双工滤波器, covering the frequency ranges 5...85 MHz / 105...1218兆赫.
CXF065 19是一个带入口阻挡器的组合双工滤波器,覆盖频率范围18...65 MHz / 85...1218兆赫.
CXF085 10是一种组合双工滤波器和一个入口阻挡器,覆盖频率范围10...85 MHz / 105...1218兆赫.
CXF065为外接式双工滤波器,频率范围为5...65 MHz / 85...1218兆赫.
CXF065 DAx是具有下行衰减的插入式双工滤波器, covering the frequency ranges 5...65 MHz / 85...1218兆赫.
CXF085 19是一个带入口阻挡器的组合双工滤波器,覆盖频率范围18...85 MHz / 105...1218兆赫.
xf065 10是一种组合双工滤波器与一个入口阻挡器,覆盖频率范围10...65 MHz / 85...1218兆赫.
AC625x返回路径模块用于AC/ACE系列放大器. 这些模块包括坡度调整、低通滤波和响应校正.
The AC6223 is a plug-in ingress blocker module (PB f > 16 MHz) designed to be used in AC-series distribution amplifiers.
AC6570和AC6572是用于AC和CX产品系列光节点的WDM滤波器.
AC6124是一个2 × 4db的分频模块,支持的频率范围为5...1218兆赫.
The AC6120 is an output module with 0 dB attenuation. 支持s frequencies up to 1.2 GHz.
AC6117为2.0/10.0 dB tap module with a supported frequency range of 5...1218兆赫.
AC6115为1.0/16.0 dB tap module with a supported frequency range of 5...1218兆赫.
AC6114为2接口.0/12.0 dB tap module with a supported frequency range of 5...1218兆赫.
AC6113是一个2.0/8.5 dB tap module with a supported frequency range of 5…1218兆赫.
AC6112为1.5/12.0 dB tap module with a supported frequency range of 5...1006兆赫.
AC6110为1.在交流放大器平台产品中用作输入模块的2ghz 0 dB跳线模块.
The E62 is a transponder module for status monitoring, ingress switch remote control, RF power measurement and automatic alignment / ALSC.
E61是一个RIS接收模块,用于远程控制入口开关.
The AC6992 is a DOCSIS 3.1个频率范围兼容CATVisor/HMS应答器,包含一个射频调制解调器和一个电平测量单元.
The AC6983 is a DOCSIS 3.0 transponder with DOCSIS 3.1 frequency range compatible level measurement unit.
The AC6981 is a DOCSIS 3.1 frequency range compatible DOCSIS transponder. 与1兼容.2 GHz ACx and ACE amplifiers and nodes.
AC6918是一个先导测量模块,用于实现自动增益和斜率控制, and automatic alignment.
AC6915是RIS接收模块,用于远程控制接入交换机.
AC6700为发射模块,输出功率为+ 3dbm或+ 6dbm.
AC6188是一款智能MLSC模块,用于AC1500/2500放大器的手动增益和斜率调节. It supports Remote Ingress Switching (RIS) functionality.
AC6158是一款智能ALSC模块,用于AC1500/2500放大器的自动增益和斜率调节.